Description
Exterior Wall Architectural Perforated Metal Aluminum Facade Cladding Panels
Reference specifications：
| Plate material | Thickness of metal | Hole Dia(mm) |
Pitch (mm) |
Sheet Width(m) |
Sheet Length(m) |
Porosity (%) |
| Rolling plate |
0.2 | 6 | 2 | 1 | 20 | 44 |
| 0.35 | 5 | 4 | 1 | 20 | 24 | |
| 0.45 | 6 | 3 | 1 | 20 | 35 | |
| 0.8 | 3 | 3 | 1 | 20 | 19.6 | |
| Flat plate | 0.5 | 1 | 1 | 1 | 2 | 19.6 |
| 0.55 | 1.1 | 2.2 | 1 | 2 | 22.67 | |
| 0.55 | 1.5 | 2.8 | 1 | 2 | 26.03 | |
| 0.8 | 1.5 | 1.5 | 1 | 2 | 19.6 | |
| 0.8 | 2 | 3.4 | 1 | 2 | 30.78 | |
| 1.5 | 2 | 2 | 1 | 2 | 19.6 | |
| 1.5 | 5 | 2 | 1 | 2 | 35.39 | |
| 3 | 5 | 16 | 1 | 2 | 19.6 | |
| Stainless stee; plate | 0.5 | 1 | 1 | 1 | 2 | 19.6 |
| 0.8 | 1.5 | 1.5 | 1 | 2 | 19.6 | |
| 1 | 2 | 2 | 1 | 2 | 19.6 | |
| 2 | 5 | 16 | 1 | 2 | 19.6 | |
| Aluminum plate | 0.5 | 1 | 1 | 1 | 2 | 19.6 |
| 0.8 | 3 | 3 | 1 | 2 | 19.6 | |
| 1.6 | 2 | 2 | 1 | 2 | 19.6 | |
| 3 | 4 | 16 | 1 | 2 | 19.6 |
Perforated metal plate, as the name suggests, is based on a variety of metal plates as the base material, through mechanical punching, CNC cutting and other modern processing technology, the plate according to a certain law of various holes, forming a special texture texture or pattern.
After metal plate perforation can also be according to the need for a variety of different surface treatment, such as plating, spraying, wire drawing, etc.
Early perforated plate with mechanical stamping processing, can only make a relatively regular hole, with the development of numerical control technology and plasma, laser, water knife and other cutting technology, now the perforated plate can be as digital engraving as any pattern.
When the perforation size and perforation rate is higher, the stiffness of the plate is reduced, and it is necessary to set a reinforcing rib behind the panel, and the outer vision is likely to see the rib shadow, so the design, the plate partition of the perforation plate as far as possible to control the width, such as the width of the aluminum plate in about 1 meters, or increase the thickness of the plate width appropriate relaxation.
-
At the same time, you can also provide drawings, we customize it for you.
-
Pleased feel free to contact us.
-
